Description

1 set of replacement filters with following : 1x 10 Micron Pleated Sediment Filter 10 Micron Pleated Polypropylene Sediment Filter Size 2.5" x 19 7/8" Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water. Meets FDA requirements for food and beverage contact Washable filter / minimize the filtration cost Operation Temperature: 40°F to 140°F Low surface area, low pressure drop across filter stage. 1x 5 Micron PP Sediment Filter Three-layers structure cartridge, High contaminant holding capacity. Remove chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water. 100% PP Polypropylene for compatibility with a wide range of process fluids. 5 Micron, Micro-Denier™ melt-blown filtration fiber, high removal ratings. Formed by thermal bond without use of any binders and adhesives. Certificated by NSF42 and FDA CFR Title 21. (Not printed on the filter label) Maximum operating pressure: 125 PSI Operating Temperature Range: 40-100°F Dimensions: 20" x 2.5" Maximum Flow Capacity: 1 - 20* GPM * Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions. 1x CTO carbon Filter Carbon Block Filter - Size 2.5inch x 19 7/8 inch 5 Micron nominal filter remove small particles and cargon carbon fines to ensure 100 % of chlorine removal from water. Total 3 filters, each individually wrapped.