Description

Double Sided Heavy Duty Tape Waterproof Mounting Tape 2" x 18Ft Two Sided Adhesive Photo Frame Hanging Strips for Poster Automotive Home Deco Nail Box G50mm PRODUCT FEATURES: clear double face tape (1mm/" thick) is formed with double coated pressure sensitive adhesive for bonding a wide variety of substrates including lower surface energy materials and smooth surfaces for both outdoor and indoor, such on glass, marble, plastic, tile, wood and lamination; but NOT good to textured surfaces, such as fabric, wallpaper and painted walls (taken off paints while removal). PRODUCT APPLICATION: industrial mounting tape has strong strength that can withstand moderate to heavy strength and it's widely used for car trims, registration plates, name plates, plaques, signs, metal mailbox, hangers, toothbrush holder, home projects, wall arts, home decoration, LED strips, generator hour meters, car wind protector, motion sensor, fake nail box and so on. Adhere the tape VERTICALLY on the back of object with firmly press, object depths should not EXCEED ”. PERMANENT GUIDELINES: For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water, avoid finger touch and contamination to adhesive. Ideal tape application is accomplished when temperature is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended. CURING PROCESS: Heavy Duty Mounting Tape is a new alternative to screws or nails. The conformable double sided tape sticks to smooth surfaces (DO NOT STICK TO ANY TYPE OF PAINTED WALL OR HEAVY TEXTURED SURFACES), weatherproof permanent bond. It might cause damage or leave residue after dwelling 72 hours on object while removal. A sharp tool is needed if you need to remove and clean with adhesive remover. Warm up the adhesive in cold weather. ADHESION PROMOTER: Acrylic double sided mounting tape is for permanent solution, but its initial adhesion is not strong and specially on rough or textured surfaces; suggests using ADHESION PROMOTER to increase the initial bonding strength, search ASIN: B098747W2K for 94 ADHESION PROMOTER or other products will also work with Acrylic Tapes. Very High Bonding Double Sided Tape Industrial Grade 2 Sided Mounting Tape - Widely Used: Very high bonding tape works extremely well on smooth surfaces and widely used for LED strip lights, trims, car registration plates, name plates, plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, tooth brush holder, photo frames, power strip and other automotive home office decorations. This double sided mounting tape is an industrial grade Acrylic foam tape, more stable and better initial adhesion which is good for permanent and reliable installation indoor, particularly in exterior applications where extreme weather, moisture and adhesive is needed. The longer applied the stronger it will hold. Super sticky strength that can withstand moderate to heavy mounting with peel adhesion up to 20lb/in and tensile strength up to 90 lb/square inch as tested on stainless steel. Holding weight is based on objects with a maximum depth of ”. The PE film liner might be difficult to peel if you do not have nail; you can Use a knife to cut out the backing film a little bit or Pinch and stretch a corner of the adhesive until the backing liner lifts from the tape for easier liner removal. WARM THE ADHESIVE SIDE UP IN COLD WEATHER BY HAIR DRYER FOR BETTER INITIAL BONDING.